The indentation machine is also called a die-cutting machine or a beer machine. When using an indentation machine in a printing factory, the following points should be paid attention to:

1. The equipment in the workshop of the indentation machine should be arranged reasonably, the ground on the road should be smooth, and the passage should be clear.

2. The equipment direction of the indentation machine should be conducive to safe operation. It is advisable for the operator to face the wall, and the minimum clearance between it and the surrounding buildings and equipment the interval should not be less than 0.8m.

3. When driving, try the clutch with no load first, and the clutch operation should be stable.

4. All exposed transmission parts of the indentation machine should have reliable and complete protection.

5. The creasing machine press frame_ should be equipped with a hand-held maintenance device or a pressure rod maintenance device

6. The stroke end of the stroke switch of the creasing machine should have a limit safety device, so that the force on the switch is not greater than the allowable value.

7. The limit switch of the automatic reset of the indentation machine should automatically return to the original position after the external force is removed.

8. The drive shaft of the creasing machine must be equipped with protective equipment for manpower to drive the drive shaft.

9. The location of the equipment should be able to meet the site conditions for vertical lifting and repair operations.

10. The indentation machine should be fully equipped, with complete technical information and random special tools.

Ningbo Ronghua Digital Post Printing Equipment Co., Ltd. not only has digital creasing machine but also digital laminating machine and other products. Welcome to visit our official website.