Summary of solutions to problems of automatic laminating machine:

1. The automatic laminating machine does not start: the input wire is blocked, the power cord is connected reversely, and the voltage is not enough.

2. The film pulls down when the automatic laminating machine is not sucking up: Whether the solenoid valve or the hand valve is open.

3. The suction film is not in place: the source vacuum is not enough, the air leaks, the temperature is not enough, the film is too thin, the workpiece has been pasted with other materials, the depth of the workpiece exceeds the pulling of the film, the suction time is too short, the film is not pulled up, and the workpiece The distance is too close.

4. The main power switch trips: the input wire on the top of the heating box is leaking, the distribution box is leaking, the external wires are laid on the equipment, and the motor is leaking.

5. The working degree and the vacuum degree cannot be increased: the gas path is blocked, the hand valve or solenoid valve is not closed, the vacuum pump motor belt is loose, and the vacuum gauge is damaged.

6. The surface of the overlaid workpiece is folded and not smooth or the corners cannot be wrapped: the film is not straightened, the film quality is not good, the workpiece is not polished, the glue spray is too much, and the template under the workpiece is too low.

7. Inaccurate temperature measurement: thermocouple, temperature controller. Whether the installation is incorrect and the track is damaged.

8. The phenomenon of drama breaking: the temperature is too high, the heating time is too long, the film quality is not good, and there is no heating.

Ningbo Ronghua Digital is a laminating machine supplier. Such as automatic laminating machines, cardboard laminating machines, industrial laminating machines, wood laminate machines, etc.

For more product information, please continue to pay attention to us: laminating machine supplier.