Introduction: The multi-functional and fully automatic laminating machine is a model designed for water-based dry laminating glue. It can also be used for oily glue, pre-coated film and non-glued film. One machine has four functions. The film is first coated with water-based glue and then dried by a large drying roller and drying system. At the same time, the automatic paper feeder sends the paper to the laminating host, and uses the laminating wheel to heat and press the glued film. The surface of the paper. The laminated finished product can choose roll paper shape or cut the gap through the disc cutter to cut the gap through the pull-off wheel, then choose manual or automatic paper delivery. Performance characteristics:

●The paper feeder is equipped with pre-loaded paper structure, which can realize non-stop cycle feeding.

●The paper conveying table adopts two wide suction belts and integrally movable paper pressing wheels, which makes paper conveying stable and easy to adjust.

●The powder remover adopts a hot-press electrostatic powder removing mechanism, which can preheat the paper while pressing and sticking powder, providing conditions for high-speed startup.

●The main machine laminating roller adopts a double-layer spiral water channel design, which can compensate the heat taken away by the paper at high speed in time, and ensure that the isothermal error of the roller is less than 2℃ at high speed.

●Drying roller adopts φ800 large diameter roller, adopts electromagnetic heating, heating is rapid and stable, and drying time is long.

●The drying system adopts energy-saving hot air circulation, which has fast drying speed and saves electricity consumption.

●The laminating roller adopts a gas-liquid supercharger and a φ80 diameter hydraulic cylinder, which can be produced normally at 8Mpa, and the system is durable and does not leak oil.

●Equipped with an air shaft and a film hanging mechanism, it is convenient to load and unload the film.

●The slitting machine has a thin paper flattening mechanism to adjust the flatness of the paper with tension.

●The disc cutter and the punching wheel device ensure the reliability of high-speed breaking.

●The slitting machine adopts four widened belts to convey, making the adjustment faster.

●The take-up machine is equipped with automatic acceleration discharge, slitting and continuous control to reduce the number of shutdowns.

●It is equipped with an automatic turning mechanism, which automatically enters the manual delivery channel when the paper is jammed to reduce the waste rate.

●The take-up machine adopts 4 sets of side shots and one set of back shots to ensure that the long strips of paper are collected neatly. For specific product details, you can click here: laminating machine supplier.